The Official Website of Clint Bowyer


Models Chevrolet Monte Carlo
Engine Cast Iron 5.7L V8 Aluminum cylinder heads
Horsepower (est.) 800 @ 9400 RPM
Compression Ratio 12:1
Torque 550 ft/lb @ 7500 RPM
Displacement 358 c.i. max.
Induction One 4V Holley Carburetor
Top Speed 200 MPH (est.)
Transmission 4-Speed
Fuel 112 octane Sunoco 22-gallon capacity
Front Suspension Independent coil springs Twin control arms
Rear Suspension Trailing arms, coil springs, panhard bar
Chassis Hopkins tubular chassis
Body Length 200.7 inches
Body Width 72.5 inches
Height 51 inches (min.)
Weight 3400 lbs w/o driver
Front Air Dam 3.5 inches
Gear Ratio 2.90 to 6.33:1
Spoiler 57" wide x 5.5" high
Wheel Base 110 inches
Wheels Steel 15" x 9.5"
Tread Width 60.5 inches (max.)
Front Brakes Disc
Rear Brakes Disc
Tires Goodyear Eagle
Ignition System MSD

 



Models Chevrolet Monte Carlo
Engine Cast Iron 5.7L V8 Aluminum cylinder heads
Horsepower (est.) 660 @ 7900 RPM
Compression Ratio 12:1
Torque 540 ft/lb @ 6400 RPM
Displacement 358 c.i. max.
Induction One 4V Holley Carburetor
Top Speed 195 MPH (est.)
Transmission 4-Speed
Fuel 112 octane Sunoco 22-gallon capacity
Front Suspension Independent coil springs Twin control arms
Rear Suspension Trailing arms, coil springs, panhard bar
Chassis Hopkins tubular chassis
Body Length 203.5 inches
Body Width 74.5 inches
Height 50.5 inches (min.)
Weight 3400 lbs w/o driver
Front Air Dam 4 inches
Gear Ratio 2.91 to 5.29:1
Spoiler 55" wide x 5.5" high
Wheel Base 105 inches
Wheels Steel 15" x 9.5"
Tread Width 60.5 inches (max.)
Front Brakes Disc
Rear Brakes Disc
Tires Goodyear Eagle
Ignition System MSD

 


This site is best viewed in 24-bit true color at 1024x768 resolution.
Questions or Comments about the Web Site E-mail: m-m@digital.net  
This site was developed and is maintained by
Clint Bowyer and M & M Web Development